Premium Stainless, Aluminium & Titanium Fabrication Materials

Trusted By Fabricators & Workshops Australia-Wide 🦘

🚗 Free HotWheels With All Orders Over $35

All

652 products
9% Off
2.5
$20.00
$20.00
$22.00
2.5 inch ( 63mm) line marking stencil for tube Marking a tube to cut straight can be difficult, almost as difficult as cutting a tube straight without a line ( unless you have a bandsaw)  This wor...
Turbosmart Style WG45 - Wastegate Outlet Flange - Titanium | Gen 4
$55.00
$55.00
Turbosmart Hypergate 45mm Titanium Weld On V-Band Outlet Flange. This flange is designed for use with Bend Brothers 1.75" Grade 2 Titanium 1mm Wall Tube   For Use With: Turbosmart Hypergate (45mm) ...
1.75
$113.00
$113.00
1.75" (45mm) Grade 2 Titanium tube rolled from 1.2mm wall Titanium sheet to keep a consistent wall thickness across the length of the tube then seam welded and finished for a premium quality produc...
2.5
$29.00
$29.00
  2.5" To 3" Size reducer used for making expansion chambers in turbo dump pipes, exhaust mufflers or any time a smooth diameter change is required    Product: 2.5"-3" Aluminium Size Reducer  Mater...
Titanium Sheet - 500mm x 500mm x 2mm
$201.00
$201.00
Premium quality grade 2 Titanium sheet  Is known for its high strength and lightweight, making it perfect for using as bracing, brackets, heat shielding and much more.   Specifications. Product: Gr...
Sold Out
2
$47.00
$47.00
Product: 2" 90° Titanium Elbow 1.2mm wall thickness Material: Grade 2 titanium Total Angle: 90° 1.2D Radius Total Quantity: 1x Elbow What you get: 1x ultrasonically cleaned, packed & sealed el...
2
$25.00
$25.00
  2" (51mm) To 3" (76mm) Size reducer used for making expansion chambers in turbo dump pipes, exhaust mufflers or any time a smooth diameter change is required    Product: 2"-3" Aluminium Size Redu...
Sold Out
M16x1.5 Sensor Bung - Aluminium - Lipped
$5.00
$5.00
6000 Series Aluminium Weld-On M16x1.5 Bung With Machined Lip Designed To Fit Bend Brothers Tube Product: 304ss Weld-On M16x15 Bung  Material: 6000 Series Aluminium Total Quantity: 1  Thread: M16x1.5
Sold Out
2.75
$18.00
$18.00
Product: 2.75" (70mm) 90°(90 Degree) 304ss Exhaust Bend, 1.6mm wall thickness, Designed to be used with Bend Brothers Stainless Tube Material: 304 Grade Stainless Steel  Total Angle: 90° 1.5D Rad...
1.5
$106.00
$106.00
1.5" (38mm) Grade 2 Titanium tube rolled from 1.2mm wall Titanium sheet to keep a consistent wall thickness across the length of the tube then seam welded and finished for a premium quality product...
Sold Out
3.5
$9.00
$9.00
Bend Brothers 3.5" (89mm) 3 Bolt Exhaust Flange Gaskets are made from quality Embossed Steel & Graphite. Designed to be used with Bend Brothers 3.5" 3 Bolt 304 Stainless Steel Flange   Produ...
12% Off Sold Out
3.5
$22.00
$22.00
$25.00
3.5 inch (89mm) line marking stencil for tube Marking a tube to cut straight can be difficult, almost as difficult as cutting a tube straight without a line ( unless you have a bandsaw)  This work...
2
$79.00
$79.00
Bend Brothers Welded Donuts are made from quality aluminium Providing you with the highest quality aluminium donuts for intercooler piping, radiator/coolant systems, swirl pots, fuel filler necks &...
Sold Out
2.5
$28.00
$28.00
Bend Brothers 2.5" 6061 Aluminium Pie Cut's are Precision cut, ultrasonically cleaned, individually sealed pie cut pieces ready to weld out of the packet. Designed with the fabricator in mind each ...
Sold Out
Titanium sheet - 500mm x 500mm x 1.5
$158.00
$158.00
Premium quality grade 2 Titanium sheet  Is known for its high strength and lightweight, making it perfect for use as bracing, brackets, heat shielding and much more.   Specifications. Product: Grad...
Sold Out
2.25
$15.00
$15.00
Product: 2.25" 90° 304ss Elbow 1.6mm wall thickness Material: 304 Grade Stainless Steel  Total Angle: 90° 1.2D Radius  Total Quantity: 1x Elbow What You Get: 1x elbow in manufacturer packaging with...
Sold Out
3.5
$79.00
$79.00
3.5" (89mm) Stainless Steel Exhaust Valve Butterfly valves are used in an exhaust system to control exhaust volume by opening or closing muffler or for increasing exhaust flow by using a valve for ...
3.5
$34.00
$34.00
3.5" To 4" Size reducer used for making expansion chambers in turbo dump pipes, exhaust mufflers or any time a smooth diameter change is required    Product: 3.5"- 4" Aluminium Reducer   Material:...
Sold Out
2.25
$27.00
$27.00
2.25" (57mm) 6000 series Aluminium tube is generally used for intercooler piping, radiator & coolant systems, exhaust pipes, overflow tanks & swirl pots. The raw finish is suitable for all...
1.75
$62.00
$62.00
Titanium tube rolled from 1.2 mm wall Titanium sheet to keep a consistent wall thickness across the length of the tube, seam welded and finished for a premium quality product     Product: 1.75” (4...
Sold Out
3.5
$53.00
$53.00
Bend Brothers 3.5" (89mm) 2 Bolt Titanium Exhaust Flanges are made from commercially pure grade 2 Titanium  CNC Machined to a high tolerance for the quality finish we maintain  Intended to be used ...
2.5
$47.00
$47.00
Product: 2.5" 45° Titanium Elbow 1.2mm wall thickness Material: Grade 2 titanium Total Angle: 45° 1.2D Radius Total Quantity: 1x Elbow What you get: 1x ultrasonically cleaned, packed & sealed ...
Sold Out
3
$15.00
$15.00
$0.00
Tri-Clover clamps are a very quick and simple way to hold your v-band flanges while mocking up exhaust systems or for when a fast assembly for the next tack weld is needed.   Product: 3" (76mm) SS ...
Sold Out
Titanium Sheet - 500mm x 500mm x 1mm
$130.00
$130.00
Premium quality grade 2 Titanium sheet  Is known for its high strength and lightweight, making it perfect for use as bracing, brackets, heat shielding and much more.   Specifications. Product: Grad...